Development History of Lightweight Partition Wall Panels (Foam Partition Wall Panels)

Development History of Lightweight Partition Wall Panels (Foam Partition Wall Panels)
In the rapidly evolving construction industry, environmental awareness has grown significantly. As demands for building materials continue to rise, lightweight partition wall panels have emerged as a leading product in the building materials sector, leading to an increase in the number of manufacturers specializing in lightweight partition wall panels (foam partition wall panels).

Despite the global economic downturn and government macroeconomic policies that have imposed restrictions on the construction and real estate sectors, the construction market continues to develop. Lightweight partition wall panels (foam partition wall panels) have gained popularity as a new type of simple wall material due to their lightweight yet high-strength properties, ease of installation, and economic and environmental benefits. The use of lightweight partition wall panels is encouraged as an alternative to traditional cement brick walls. Modern buildings are predominantly high-rise structures, and our living spaces are increasingly compact. Therefore, advancing the development of building materials is a key objective for the construction industry. Lightweight partition wall panels offer fire-resistant, moisture-proof, sound-insulating, and thermal insulation properties. They are primarily made from materials such as fly ash, tailings, and industrial waste, which not only conserve natural resources but also receive strong government support. They feature lightweight and high strength, making construction highly convenient with short project timelines. They are not only favored by the construction industry but also widely appreciated by lightweight partition wall panel installers.
Advantages of lightweight partition wall panel development
First, compared to aerated concrete block walls, lightweight partition walls have a lower overall construction cost. Currently, the unit price of lightweight partition walls (without plastering) is approximately 23% lower than that of aerated concrete block walls (including plastering), significantly reducing the total construction cost.

Second, they align with the principles of green construction. Over 85% of the raw materials are recyclable construction waste materials, and the manufacturing process is highly automated. On-site assembly is standardized and streamlined.
Third, they offer fast construction speeds and labor savings. The installation process for lightweight partition wall panels is clear and efficient, with two workers averaging 25–30 square meters per day. Additionally, they can be installed without plastering, allowing direct application of putty, which greatly improves construction efficiency.
Fourth, lightweight partition walls do not require plastering and can be directly coated with putty, offering significant advantages for developers’ costs and construction site management. Lightweight partition wall panels also have a natural advantage, as direct putty application ensures both vertical and horizontal alignment meet standards.
Fifth, fewer auxiliary materials are required for installation. Lightweight partition wall panels only need a small amount of U-shaped brackets and anti-crack mortar, reducing auxiliary material costs.
Sixth, they have excellent fire resistance and are environmentally friendly. Their non-combustibility meets Class A standards, with a fire resistance time exceeding 4 hours at 1000°C. The materials used in lightweight partition wall panels are environmentally friendly products that do not contain harmful substances to the human body [2].
Seventh, they can expand indoor clear space. Lightweight partition wall panels can fully expand the space of a building. Using the original construction method, interior partition walls are built with aerated concrete blocks, typically designed with a thickness of 200 mm, and the total wall thickness, including the plaster layers on both sides, can reach 250 mm. When designing lightweight partition wall panels, no plastering is required, and the finished wall thickness is 100 mm.
Eighth, indoor electrical wiring installation saves labor costs, as there is no need for grooving. Simply position the base box, drill holes at the designated locations, and run the conduit through the pre-drilled openings in the partition wall, thereby saving on grooving and subsequent repair costs.
Ninth, the sound insulation performance meets the sound insulation requirements for residential buildings.
Development Prospects for Lightweight Partition Walls
First, lightweight partition walls are environmentally friendly and energy-efficient, aligning with international green building standards.

Second, the raw materials for lightweight partition walls are primarily industrial and agricultural solid waste, resulting in low costs and relatively simple production processes that are easy to master.
Third, under the premise of large-scale construction of residential buildings and industrial plants across regions, lightweight partition wall panels have significant market demand.
Fourth, lightweight partition wall panels are a new type of green and environmentally friendly building material, easy and quick to install, and the walls are much lighter than traditional walls. Given the current tight housing resources, the lightness and thinness of lightweight partition wall panels align with the future development needs of the construction industry and will inevitably be more widely applied in industrial and residential decoration in the future.
Fifth, more advanced lightweight partition wall panels are now being used in both residential and industrial buildings, with a promising market outlook. Although the real estate industry is currently experiencing some slowdown, the rapid pace of technological advancement and societal development ensures that innovations will thrive. Therefore, the future development of new building materials will be smooth. In conclusion, the prospects for lightweight partition wall panels are highly promising.
Conclusion
Lightweight partition wall panels have become a popular wall material in the construction industry. For installers, their lightweight material offers advantages such as ease of construction, convenient transportation, and quick installation; for users, they provide benefits like sound insulation, waterproofing, and thermal insulation, making living spaces more comfortable.

Company Profile

Cabr-Concrete is the global leader in Low-Density Cellular Concrete (LDCC), Celluar Light Concrete (CLC), and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012’s.

We can supply Calcium formate over the world. The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.Send us an email or click on the needed products to send an inquiry.

If you want to know more about Hand-synthesised Cellular Concrete Foam, please feel free and contact us: sales1@cabr-concrete.com

Payment

T/T, Western Union, Paypal, Credit Card etc.

Shipment

By air, by sea, by express, as customers request.