Foam Concrete Horizontal Mixer​ 300L 750L

Product Description of Horizontal Mixer

TR-M300 concrete mixer is under the action of the inner and outer spiral belts on the mixing shaft to turn the material within the scope of the cylinder. The internal spiral belt pushes the material from the middle to the two sides, the outer spiral belt pushes the material from the two sides to the center, and the back-and-forth infiltrated material moves and changes along the radial direction under the rotation of the spiral belt, thus forming a convection cycle. Due to the stirring of the movement mentioned above, the materials can be quickly and uniformly mixed, the shaft seals at both ends are specially sealed, the powder and liquid have no leakage, and the replacement cost of the sealing consumables is low. The replacement is convenient, so it is a widely used, adaptable, High-efficiency mixing equipment with solid performance and sound effects.

How does a horizontal mixer work?

The horizontal cylinder is equipped with double-shaft rotating and reversed paddles. The paddles are at a certain angle to stir the materials in the axial and radial directions so that the materials can be mixed quickly and evenly. Performance characteristics of the horizontal mixer: The paddle's structure will weaken the material's gravity. With the lack of seriousness, the differences in particle size and specific gravity of each material are ignored in the mixing process.

Intense stirring motion shortens the mixing time, making it faster and more efficient. Even if the material has specific gravity and particle size differences, it can achieve a good mixing effect under the rapid and violent tossing and throwing of the staggered stirring blades. It has high mixing uniformity and less residue and is suitable for mixing more than two kinds of fertilizers and additive premixes.

Features of horizontal mixer

The horizontal mixer makes the materials thoroughly mixed, thereby improving the mixing uniformity; using a novel rotor structure, the minimum gap between the rotor and the bright body can be adjusted to close to zero, effectively reducing the residual amount of materials. The material is broken, the overall structure is more reasonable, the appearance is beautiful, and the operation and maintenance party installs and maintains.