Concrete Hose Pump

The hose pump series of Luoyang Tongrun Info Technology Co., Ltd. is a new type of peristaltic hose pump developed by absorbing advanced foreign technology. It gets rid of the operation mode of traditional pump impeller and shaft seal and has advantages in the transportation of media with high viscosity, high corrosivity, and large fluid impurities. It is a completely different principle from traditional pumps and has a wide range of applications.

Versatility: The hose pump can be used to continuously transport fluids. Together, it can detect and deal with many troublesome fluid transport problems in time. It can transport sewage, suspended solids, corrosive chemicals, and other questionable fluids, with a flow rate of up to 40 litres per minute. Some common uses are coal slurry, magma, mud, mortar, slurry, oil, etc. transportation.

Features of hose pump

1. Easy to install, simple to run, and can run continuously for a long time;

2. Choice of various fibres and slurries delivered in the pump, shearing, abrasive or gas-liquid-solid mixture;

3. It can easily corrode fluids in the pump, such as highly viscous, high-density fluids, and pasty fluids;

4. The hose pump does not need to replace the seals, gaskets, impeller rotor, stator or various traditional pump internal parts;

5. The movement of the pump is divided into clockwise rotation without backflow and siphon phenomenon and has a shut-off valve function; in reverse, the fluid can be sent out and sucked back;

6. The pumped fluid is proportional to the speed, which can be accurately measured.

Working principle of hose pump

A special rubber hose with a smooth inner wall and reliable strength is installed inside the pump body. It is rotated and squeezed along the hose by a pair of pressure rollers. This rotation allows the medium to be transported in one direction without backflow. The hose is transporting. After the medium is applied, the elasticity of the squeezed hose and the force of the side guide rollers restore the hose to its original shape. At this time, a high vacuum is generated in the hose to suck the medium into the lumen again. The roller is squeezed and discharged from the hose so that the medium is continuously sucked and discharged.

Advantages of hose pumps

It has an unsealed structure without any leakage or pollution;

Using advanced rolling technology, the pressure roller does not need any lubrication;

Strong self-priming ability and self-cleaning ability, can suck materials positively and negatively; simple hose assembly,

Simple installation and maintenance, low maintenance cost and simple operation;

The flow can be adjusted linearly and has a certain metering function;

It does not cause any blockage in the transportation of liquids with high viscosity and impurities;

The pump has a long service life, high head and high pressure at the pump port.

Parameters of hose pumps: