-
TR-20 lightweight concrete machine is a portable lightweight concrete equipment developed by our company based on market demand and combined with years of experience in the research and development of foam concrete cast-in-place equipment. It will load, mix, foam, and Pumping and other functions are separated independently, which is convenient for users to transport.
-
Integrated machine for pouring light steel keel and structural wall
-
TR-M300 concrete mixer is under the action of the inner and outer spiral belts on the mixing shaft to turn the material within the scope of the cylinder. The internal spiral belt pushes the material from the middle to the two sides, the outer spiral belt pushes the material from the two sides to the center, and the back-and-forth infiltrated material moves and changes along the radial direction under the rotation of the spiral belt, thus forming a convection cycle.
-
The small foam concrete mixing barrel adopts an overall stainless steel design (to ensure that no chemical reaction occurs before the foaming agent and agitator and the mixing barrel), a filter funnel outlet, and a quick-installed stainless steel valve (durable and is the upper limit of the life of the ball valve or the rotary butterfly valve hundred times).
-
Large-scale foam concrete backfilling projects such as highway roads and bridges, backfills of bridge abutments, replacement and heightening above tunnels, large-scale coal mine filling, and road widening soft foundation backfilling.
-
TR-10 lightweight concrete machine is a portable lightweight concrete equipment developed by our company based on market demand and combined with years of experience in the research and development of foam concrete cast-in-place equipment. It will load, mix, foam, and Pumping and other functions are separated independently, which is convenient for users to transport.
-
There are no requirements for the site, the high ground is dry, and water and electricity are sufficient. Normal temperature, heating, and normal pressure production processes are all possible.
-
Hose pump gets rid of the operation mode of traditional pump impeller and shaft seal, and has advantages in the transportation of media with high viscosity, high corrosivity, and large fluid impurities. It is a completely different principle from traditional pumps and has a wide range of applications.
-
TR30 foam generator developed by our company. It can be used in laboratories, small-scale foam concrete cast-in-situ projects, and pilot lines of foam concrete products. The outstanding advantages of TR30 foam generator are low foam moisture content, more foaming agent, high foam uniformity, large foam output, and other benefits.
-
TR75 foam generator developed by our company. It can be used in laboratories, small-scale foam concrete cast-in-situ projects, and pilot lines of foam concrete products. The outstanding advantages of TR75 portable foam generator are low foam moisture content, more foaming agent, high foam uniformity, large foam output, and other benefits.
Foam generator is construction machinery equipment that can make a certain concentration of cement foaming agent into a foam. The cement foaming agent itself cannot automatically become foam, it must pass the mechanical action of the foaming machine to become foam. The foam generator and the cement foaming agent are technical system that cooperates with each other and cannot function alone.
CLC is called as Cellular Light Weight Concrete or Foam Concrete. Cellular Light Weight Concrete (CLC) is a version of light weight concrete that is produced like normal concrete under ambient conditions. CLC Blocks are a cement-bonded material made by blending slurry of cement. Stable, pre-formed foam manufactured on site is injected into this slurry to form foam concrete. Aqueous foam is produced from the CLC foam generators and injected into the slurry of cement, fly ash and water in a foam concrete mixture (IFM). It creates many small air cells which are uniformly distributed throughout the concrete and create cellular from 300kg/m3 to 1800kg/m3 with a compressive strength between 5kg/cm2 to 200kg/cm2.
Application of Foam Concrete Machine
Home improvement floor heating construction, small and medium-sized roof insulation construction, floor heating mortar filling construction, prefabricated insulation board and core material processing,
Fire door core board prefabrication processing, refractory material prefabrication processing, wall-filling foam concrete processing, foam concrete insulation engineering, lightweight wallboard prefabrication processing, mine, road and bridge backfill project construction.
Luoyang Tongrun Info Technology Co., Ltd. is a professional in lightweight concrete and foam concrete solutions. We can supply concrete foaming agents, superplasticizers, aerogels and foam concrete strength enhancers for lightweight concrete mix, CLC blocks all over the world. We also produced a serious of professional equipment for your need, such as polycarboxylate superplasticizer synthesis equipment, CLC block Foam Generator, Concrete mixer, Concrete pumping machine, etc. Send us an email or click on the needed products to send an inquiry.
Payment Term
L/C, T/T, Western Union, Paypal, Credit Card etc.
Shipment Term
By sea, by air, by express, as customers request.
Storage conditions
1) Store in a dry environment at room temperature.
2) Avoid damp and high temperature.
3) Use immediately after opening the inner packing bag.