What is the core component of the cement foaming machine
The foam generator, also known as the foam cylinder, is the core component of
the cement foaming machine. The foaming agent passes through it under pressure
to generate foam. Therefore, the proper design of its technical parameters
determines the foam quality, which is invisible from the appearance of the
cement foaming machine. The main factors of the foam generator are its
length-to-diameter ratio, the variety of filling materials, and the filling
volume. If its length-to-diameter ratio is too large, the foam tube is too long,
the air resistance is large, the foam is small, and the water content is small,
that is, the foam is dry and the output decreases. At the same time, the foam
wall is too thin and easy to break. However, if the foaming tube is too short,
the output is high, but the foam has a large water content and the quality is
degraded. Therefore, there is an optimal ratio between the length and the
diameter of the foam cylinder, which should be determined through a lot of
experiments. The second factor of the foam generator is the variety of filling
materials. When granular materials are added, the bubble diameter becomes
larger, and when fibrous materials are added, the foam becomes smaller. The
filling volume also has a great influence. Large filling volume will result in
high resistance, small bubble diameter, lower output, and low foam water
content; while filling volume will increase foam and output increase, but with
high water content.
Main application of small cement foaming machine
The small cement foaming machine is a cement product with unique technology and good quality. It has many uses in construction engineering. It is mainly used in floor heating and thermal insulation layers, roof thermal insulation layers and thermal insulation walls. Small cement foaming machine is widely used in: foam concrete cutting, lightweight wallboard, fire door core magnesium oxychloride cement foaming and glass magnesium composite air duct production line and other environmentally friendly foaming auxiliary equipment, with large foaming volume, use Convenient and flexible.
The outstanding feature of this cement foaming machine is the low water content of the foam produced, that is, the low density of the foam. The weight of foam per liter can be controlled below 50g at room temperature, up to 20g.
The general foaming machine in the market has a large water content, and its density is mostly 80-100g per liter. The water content of the foam is actually a foaming agent solution that has not been foamed. The foam has a high water content (that is, a high density), and its harm is great. One is that the foaming agent solution that has not been foamed is wasted, increasing the amount of foaming agent;
The second is that a large amount of water in the foam enters the cement slurry, which reduces the density of the foamed cement. When the excess water evaporates, it causes capillary pores, which increases the thermal conductivity, increases the water absorption rate, and reduces the compressive strength, which seriously affects the quality of the foamed cement. Therefore, foam density is the first indicator of foam quality. The main factor that determines the foam density is the performance of the foaming machine.
About Airconcretesolutions
Airconcretesolutions is a trusted global chemical material supplier & manufacturer with over 12 years experience in providing super high-quality chemicals and Nanomaterials. The company export to many countries, such as USA, Canada, Europe, UAE, South Africa, Tanzania, Kenya,Egypt,Nigeria,Cameroon,Uganda,Turkey,Mexico,Azerbaijan,Belgium,Cyprus,Czech Republic,Brazil, Chile, Argentina, Dubai, Japan, Korea, Vietnam, Thailand, Malaysia, Indonesia, Australia,Germany, France, Italy, Portugal etc.
If you are looking for foam generator, please send an email to:sales@cabr-concrete.com
Ask a quote for the latest price and one of our team members will respond as soon as possible. Fields marked with * are required.
