The leading foam concrete, lightweight concrete additives supplier |
3D Printing Metal Powder
Foaming agent

Foaming agent

TR-C Polymer Foaming Agent

TR-C Polymer Foaming Agent

Apperance: Transparent liquid

Recommended amount(kg/m3): 0.6-1.1

Foaming multiple: 28

Dilution factor: 1 : 30 - 50

Packing: 25 kg/barrel, 200 kg/barrel, IBC Tank

Concrete foaming agent is an additive that is used for lightweiht concrete products.

Foamed concrete is a high working, low density material that can absorb up to 50-80% of the air.

Foam concrete is generally self-leveling, self-compacting, and pumpable, etc.

The risk of plastic shrinkage or settling cracks is significantly lower than that of standard concrete.

Send Inquiry. TDS-TR-C polymer foaming agent.pdf

Overview of TR-C Polymer Foaming Agent

TR-C polymer concrete foaming agent was developed by Luoyang Tongrun to meet the performance requirements of foamed wallboards and CLC blocks. 

TR-C polymer foaming agent can satisfy the compressive strength, thermal conductivity, and stability of foamed wallboard. 

TR-C polymer foaming agent is especially suitable for foamed wallboard, polystyrene particle-foamed cement wallboard, and other foamed wallboard products, CLC blocks. 

Compared with the industry standard, the stability and foaming ratio of the TR-C foaming agent are greatly improved.

 Parameters of TR-C Polymer Foaming Agent


Test Results


Light yellow and transparent



Foaming multiple


Settlement distance(mm)




Dilution ratio


Operating temperature (℃)


Features of TR-C Polymer Foaming Agent

1) Increase the strength of the wallboard by 20%

Because of its high foam toughness, the foam wallboard made of foamed wallboard has high cell integrity, closed cell ratio of more than 90%, and spherical thin shell structure, which increases the strength of foamed concrete by more than 20% compared with foam concrete with connected foam cells. 

To achieve the same design strength, foam concrete with a high closed-cell ratio can reduce density and save 10% of raw material cost. 

2) To improve the thermal insulation performance of wallboards and other products

The foam wallboard made of the foaming agent has extremely high cell integrity, and the cell closure rate is more than 90%. Hundreds of millions of closed pores are formed inside the wallboard, which can seal a large amount of air, form an inert heat conduction layer, and improve the thermal insulation performance of the wallboard. 

At the same time, because it has higher strength than other foamed cement with the same density when it reaches the same strength, it can reduce the density of foam concrete, thus reducing the cost and improving the performance of thermal insulation. 

3) High stability

TR-C polymer foaming agent is composed of a high-performance foam stabilizer and surfactant. The foam stability is remarkable. In the wallboard production process, the foam paste stability is high, there is no mold collapse phenomenon, the foaming and workability are good, and it can fill the mold without leaving a dead corner.

Instructions for TR-C Polymer Foaming Agent

1) Dilute in advance in the proportion of 1 part of the foaming agent: 30-40 parts of water.

2) When the appropriate amount of foam is injected according to the bulk density requirement, and the mixture is evenly mixed, the production of foam concrete is completed.

3) The foaming agent should add 0.8-1kg foaming agent stock solution per cubic foam concrete product.

why choose us 

Why choose us

Company Profile

TRUNNANO is the global leader in Low-Density Cellular Concrete (LDCC), Celluar Light Concrete (CLC), and advanced engineered foam solutions. Known globally for its commitment to research, innovation, and applied expertise, we have been providing engineered foam solutions since the early 2012's.

We can supply high-quality Concrete Foaming Agent such as Polymer Cellular Lightweight Concrete Foaming Agent, TR-C Polymer Foaming Agent,TR-A Concrete Foaming Agent all over the world.

The company has a professional technical department and quality supervision department, a well-equipped laboratory, and equipped with advanced testing equipment and after-sales customer service center.Send us an email or click on the needed products to send an inquiry.

Package and shipment 

Package and transportation

Package of TR-C Polymer Foaming Agent

25kg/barrel, 200kg/barrel, IBC tank

Storage Method of TR-C Polymer Foaming Agent

The polymer foaming agent should be sealed and stored in a cool, ventilated warehouse.

If it is exposed to direct sunlight or high temperature for a long time, it will easily cause deterioration.

Quote for the Latest Price

Ask a quote for the latest price and one of our team members will respond as soon as possible. Fields marked with * are required.


  • Luoyang Tongrun Info Technology Co., Ltd. ( is the world's leading nanomaterial technology developer and application manufacturer, the company has more than 20 years of industry experience, after years of scientific research and production, has been professionals in lightweight concrete and foam concrete solutions. We can supply concrete foaming agents, superplasticizers, aerogels and foam concrete strength enhancers for lightweight concrete mix, CLC blocks all over the world, suitable for ordinary cement foamed concrete cast-in-place, block, plate, insulation wall, etc.